Parts library

The generic parts Spice++ simulates and the named parts library, from the LM358 and 2N3904 to the NE555 and LM317.

Generic parts

Passive
Resistor, capacitor, polarised capacitor, inductor, potentiometer, transformer, fuse, NTC thermistor, varistor, crystal
Sources
Voltage and current sources, AC source, battery, supply rail, behavioural voltage and current sources
Controlled
VCVS (E), VCCS (G), CCVS (H), CCCS (F)
Diodes
Diode, Zener, Schottky, LED, photodiode
Transistors
NPN and PNP BJTs, NMOS and PMOS, N and P JFETs, power MOSFETs, IGBT, phototransistor
Thyristors
SCR, TRIAC, DIAC
Switching
Voltage and current controlled switches, SPST relay, optocoupler
Other
Op-amp, ideal transmission line, logic gates (AND, NAND, OR, NOR, XOR, inverter), subcircuit blocks with 2 to 8 pins

Named parts

Real parts with datasheet-based models and the pin order of their package. Each part's model is stored inside your design, so a shared design always opens with its models.

TypeParts
Op-ampsUA741, LM358, LM324, TL071, TL072, TL074, LF351
ComparatorsLM311, LM339
BJTs2N3904, 2N3906, 2N2222A, BC547B, BC557B
MOSFETs2N7000, BS170, IRF510, IRF9540
JFETs2N3819, J201
Diodes1N4148, 1N914, 1N4001, 1N4007, 1N5819
Zeners1N4733A, 1N4740A, 1N4744A
LEDsRed, green, blue
RegulatorsLM7805, LM7812, LM7905, LM317, LM1117-3.3
TimerNE555
Each named part records which datasheet behaviour its model reproduces and which it does not, and the assistant takes those notes into account when it uses the part.